Tuffmat Safety surfacing flooring cushioning for indoor and outdoor play areas
contact
TUFF MAT
INSTRUCTIONS
When interlocking the mats together, they must all be facing the same direction. One corner of the mat looks like a heart, so you can use this corner as a guide. For example, when installing turn all the mats so that the heart shaped corner is in the upper left corner.

The mats are easily cut to fit for wall to wall installations. Each mat is 40 inches or 3.30 ft in length. The border strips only add about 1/2" to the edge of the mat. Allow approximately 1/2 inch gap around perimeter of room during installation to allow for mat expansion which can occur with fluctuations in heat and humidity. We advise to keep any direct sun light off the mats as this can heat up the mats and cause expansion.

Clean the mats with a damp mop, hot water and Pinesol. The mats can also be vacuumed and swept. Its a good idea to use a separate bucket for the rinse water, so that the clean water stays clean longer. Large areas can also be cleaned with a walk behind auto cleaning machine.

Please note: Color tone variations can and most likely occur within the same batch of mats, even mats that are made at the factory within minutes of each other. This is common with all puzzle mats.
Edge Ramps
Sorry, there are no "corner" pieces, so corners will overlap or be open
Standard Edge Corner Overlap Corner Open
 
 
Copyright © 2012 PhunZone.com. All rights reserved.